Seen it cheaper elsewhere?
Check out the Air Tools WA Lowest Price Guarantee
SHARE THIS PRODUCT
SKUEFS 7.5/8FFCategories Airquip Rotary Screw Air Compressors, Airquip Australia, Rotary Screw Air Compressors
Export as PDF
MPN/UPC
4103505710
$10,999.00 inc. GST
Due to the bulky nature of this item it is unfortunately not eligible for free shipping.
Product Specifications | ||
---|---|---|
Brand | Airquip | |
Power Source | Electric | |
Pump Type | Screw | |
Screw Type | Fixed Speed | |
Phase | Three | |
Power (HP) | 10 | |
Power (kW) | 7.5 | |
Amperage | 20 | |
Tank Size | 500 | |
Min Pressure (PSI) | 115 | |
Max Pressure (PSI) | 115 | |
Min Pressure (Bar) | 8 | |
Max Pressure (Bar) | 8 | |
Capacity (CFM) | 37 | |
Capacity (L/sec) | 17.6 | |
Capacity (L/min) | 1056 | |
FAD (CFM) | 37 | |
FAD (L/sec) | 17.6 | |
FAD (L/min) | 1056 |
VSD Compressors - Frequency Asked Questions
What does a VSD air compressor mean?
VSD stands for Variable speed drive (sometimes called variable frequency drive or regulated speed). VSD compressors use an intelligent drive system to continuously alter the motor speed to match the air demand.
What are the advantages of variable speed drive (VSD) compressor?
The biggest advantage of a VSD air compressor is energy savings. A fixed speed compressor always draws the amount of power needed to meet the maximum compressed air demand. VSD will ramp down RPM, and therefore power consumption, when demand for compressed air is lower.
Which is better variable speed drive (VSD) or fixed speed compressor?
When demand fluctuates, a VSD compressor that varies its speed is much more energy efficient than a fixed-speed compressor that can only run flat out. While VSD compressors cost more up front, they pay back the added investment through energy savings. With regular use, a VSD machine will pay for itself through energy savings in just a few years, when compared to a fixed speed unit.
How does a variable speed drive compressor work?
Variable speed compressors work by using an inverter to speed up or slow down the motor according to air demand. Instead of all the power going directly into a traditional compressor (which runs at a fixed speed), the inverter provides the compressor with a specific voltage, saving energy.
PrevPrevious Product⟵Airquip 257 cfm 8 bar Electric Variable Speed Screw compressor, Three phase, Floor mount, EPM 45/8FM
Product Specifications | ||
---|---|---|
Brand | Airquip | |
Power Source | Electric | |
Pump Type | Screw | |
Screw Type | Fixed Speed | |
Phase | Three | |
Power (HP) | 10 | |
Power (kW) | 7.5 | |
Amperage | 20 | |
Tank Size | 500 | |
Min Pressure (PSI) | 115 | |
Max Pressure (PSI) | 115 | |
Min Pressure (Bar) | 8 | |
Max Pressure (Bar) | 8 | |
Capacity (CFM) | 37 | |
Capacity (L/sec) | 17.6 | |
Capacity (L/min) | 1056 | |
FAD (CFM) | 37 | |
FAD (L/sec) | 17.6 | |
FAD (L/min) | 1056 |
- Product Information
- Reviews (0)
- Delivery
Description
User benefits
Reliability
– Reliable components
– Quiet and trouble-free operation
– Independent cooling fan
– Asymmetric profile rotors
Uncompromised Quality
– ISO 9001· ISO 14001 quality assurance
– OHSAS 18001 quality assurance
– World renowned screw element
– Industry proven electric motor
– Vertical separator tank
Simplicity
– Base mounted design with minimum foot print for spaces with limited operating space
– Simple controller
– Direct drive
– Offers a simple plug-and-play solution
Easy Serviceability
– Easy access from front side
– Vertical cooler for easy cleaning, easy access pre filters
– Service and cleaning is a one person job
Safety
– Emergency stop button
– General alarm
– Fault shut down & alarm function
– Reverse polarity/rotation protection
– Maintenance alarm
– Motor overload protection
Smart technical advantages
Asymmetric profile rotors mounted on high quality ball and roller bearings. High degree of sealing and the fine tolerances guarantees
– Greater yield
– High efficiency
– Long life & reliability
– Lasting performance
Drivetrain system
– Innovation technology air cooled permanent magnet motor
– 1:1 directly drive to the air-end design, enhancing minimum transmission chemical loss
– IE4 and IE5 motors contribute to reduce energy consumption
Cooling system
– Designed for operation at a maximum ambient temperature of 46°c
– Large aluminium material cooling capacity
– Professional exhaust flow design brings high cooling efficiency
Tank mounted Refrigerant dryer
– Tank mounted dryer combination to limit the moisture content in compressed air, supplied with pre and post dryer filters
– Protect piping system and end side equipment from rust and possible failure caused by condensation
Tank mounted dryer system (1 station) solution advantage
Total solution installation
– Screw compressor, refrigerant dryer and 500L air receiver combined design for the convenience of 1 station installation
Professional compressed air flow
– Compressed air from screw compressor through to air receiver for 1st step condensation removal, to remove the burden on the refrigerant dryer for ensuring compressed air is suitable dry for end instruments/tools
Compact layout
– Minimum foot-print design whilst still having large 500L air receiver for efficient operation
Call and speak to Callum, Paul or the team on 1300 062 377for any enquiries.
Here is a video introduction to an Airquip Variable Speed Drive Full Featured Tank Mounted Dryer machine, demonstrating the noise level and time required to produce 500L at full pressure.
Additional information
Weight | 500 kg |
---|---|
Dimensions | 190 × 100 × 190 cm |
Reviews
There are no reviews yet.
Be the first to review “Airquip 37 cfm, 8 bar, 7.5 kw Electric Fixed Speed Screw compressor, 500L, Three phase, Full Featured, tank mounted dryer, Pre/post filters, autodrain, EFS 7.5/8FF”
You must be logged in to post a review.
If you wish to collect your product from our showroom in Canning Vale, please select 'Click & Collect' at check out.
ADDRESS
1/19 Mordaunt Circuit
Canning Vale
Perth 6155
CALL
1300 062 377
FAST DISPATCH
- Tracking number emailed instantly after dispatch
- Your item will be shipped via Courier which requires a signature for collection.
- Phone number required: Our courier will call to book the delivery day.
- A delivery day, not time: Our discounted rates require you to be home 9am-6pm on the day of delivery. Perhaps a business address is more convenient for you.
Related Products
EPM 37/8FM
Airquip 224 cfm 8 bar Electric Variable Speed Screw compressor, Three phase, Floor mount, EPM 37/8FM
$16,499.00 inc. GST
Add to cart
EPM 22/8FM
Airquip 129 cfm 8 bar Electric Variable Speed Screw compressor, Three phase, Floor mount, EPM 22/8FM
$11,199.00 inc. GST
Add to cart
EPM 11/8FM
Airquip 55 cfm 8 bar Electric Variable Speed Screw compressor, Three phase, Floor mount, EPM 11/8FM
$9,999.00 inc. GST
Add to cart